1-2t/h And 3-5t/h Feed Production Machine For Commercial Use

Date: 07/10/2020 08:37:38 From: feed-pellet-plant.com Clicks:

I Wish to inquire of the price for the 1-2T/H and the 3-5T/H Production machine I wish to venture into the feed production for commercial use. Customers buy feed pellet machine for two purposes: to use them in their own farms and sell them to other farms. No matter what kind of use, it is inseparable from the feed pellet machine equipment. The commercial use stated by the customer is sold to the customer in need. Many users will ask, What are the main points to choose feed pellet machine? Of course, the output, according to their own output to choose the right feed pellet machine.

1-2T/H and the 3-5T/H Production machine

Technical Parameters Of Feed Pellet Machine

How To Choose 1-2t/h And 3-5t/h Feed Pellet Machine

1. Output

For example, the 1-2t/h and 3-5t/h feed pellet machine asked by the customer this time, it is obvious that the tonnage is more than 1 ton, then you can choose the ring die pellet machine. Due to the large tonnage and high production requirements, the ring die pellet machine is more expensive than the general small flat die pellet machine. The main feature of the ring die pellet mill is that, the high efficient and the low power consumption. The ring die and the all the line of the roller has the same speed, and there is not additional friction. All the pressure are used to make pellet, therefore, the rind die pellet mill has the higher efficient.

2. The machine body and frame. You should check whether the pellet machine body and the frame are firm. Because they are the foundation of the whole pellet machine. The lock nut and the fastening bolt of the pellet press should be tightened.

3. The ring die rotating situations. You should check whether the ring die will skip or rub other parts. For the above reason, it will decrease the yield and damage the ring die and other parts decreasing the pellet press service life span.

4. The warehouse door. During the ring die pellet press machine production, you should check whether the warehouse door is designed in the right and suitable place and whether the door is opened and closed easily and whether the door leaks materials.

5. Test running. You can have a free test running of the pellet machine. Before the test running, you should check the lubricating condition of the gear box and the lubrication points. The first running doesn’t need to be too long, and the rotating direction of the spindle motor should be the same with the marked direction. If they are different, you should stop the machine and plug in phase commutation. After every thing is normal that is no irregular vibration, crash of gear, etc, you can feed materials.

6. The pellet considerations. Pellets quality is the direct standard of the pellet press machine quality. The pellets should be uniform, smooth, bright on the surface without cracks and the breakage rate of the pellet shouldn’t be more than 5%.

7. Pellet press manufacturers. A good pellet press machine manufacturer is a key factor for the pellet machine purchaser to buy a high-quality pellet machine. It is like ABC Machinery, who will supply superior machines to the clients, and that will get rid of a lot of troubles for the pellet press machine purchasers and give them the best service and after sale service.

8. The appearance. The spray paint of the pellet machine surface and stainless steel/plating layer parts should be uniform, smooth and firm. A good looking pellet press surface reflects the pellet press equipment manufacturer’s extent of specialization.

3-5t/h Feed Pellet Machine

Feed Pellet Machine Project Case

(1) Madagascar 1-2T/H Feed Pellet Machine

Name: Feed Pellet Machine

Country: Madagascar

Capacity: 1-2T/H

Date: Dec 19th,2017

Installation cycle: 0 Days

Feed Pellet Size: used for produce the different size feed pellet

(2) Tanzania 1-2T/H Feed Granulator

Name: Feed Granulator

Country: Tanzania

Capacity: 1-2T/H

Date: Aug 03th,2016

Installation cycle: 0 Days

Feed Pellet Size: suitable the small farm or small feed factory

(3) Qatar 3-5T/H Feed Pellet Machine

Name: Feed Pellet Machine

Country: Qatar

Capacity: 3-5T/H

Date: March 25th,2016

Installation cycle: 0 Days

Feed Pellet Size: 2-12mm

The above is the article for you: 1-2t/h And 3-5t/h Feed Production Machine For Commercial Use. If you are interested in our products or project solutions, please contact us. We will give you the best product quality and the best price. Email: enquiry@pellet-richi.com