What Are The Ways For Cattle Farms To Reduce The Cost Of Calf Production?

Date: 07/22/2020 08:46:23 From: feed-pellet-plant.com Clicks:

The production cost of a cattle farm includes feed cost, facility cost, personnel cost and other costs. The calf also has a cost. There are five ways to reduce unit costs of production in a cow-calf enterprise.

1. Decrease costs while keeping production the same. An example of this would be to sell unneeded equipment or reduce equipment expense while keeping calf production the same. Costs decrease while production is maintained, decreasing unit cost of production.

2. Hold costs the same while increasing production. The use of hybrid vigor in cow-calf production is an example of this strategy. Research shows that a crossbred cow will be more productive over her life than the females of the straight-bred contemporaries used to create her. An example of this would be an F1 Hereford X Angus cross cow. Costs of production would likely be the same, but productivity is expected to increase, decreasing unit cost of production.

3. Decrease costs while increasing production. An example of this could be the moving of a calving date for a cow herd to better match the availability of significantly lower-cost feed resources. This move of calving date could also potentially improve calf survivability if weather is more favorable, resulting in an increase in the number of calves weaned. Costs decrease while production increases, reducing unit cost of production.

4. Increase costs with an expected greater percentage increase in production. The strategic use of a protein supplement for spring-calving cows grazing low-quality forage is an example of this. The protein supplement can increase the ability of cows to utilize low-quality forage, resulting in improved body condition scores at calving, greater survivability of calves, greater calf weaning weights and increased pregnancy rates for cows. The percent increase in productivity exceeds the cost of the protein supplement, reducing unit cost of production.

5. Significantly decrease costs with a smaller percentage decrease in expected production. An example of this would be the decision to select for a genetically adapted cow that better fits her environment and requires fewer supplemental feed inputs. Pounds of calf produced would likely decrease with the cow requiring fewer inputs, but the cost to produce those pounds of calf is expected to decrease at a proportionally faster rate, resulting in a decrease in unit cost of production.

Year after year, feed costs remain the single largest expense in the cow-calf sector. In a typical year, feed equates to approximately half of total enterprise costs. However, feed may represent as much as 70 percent of all cow-calf costs when extremes such as drought occur. Thus, it is no surprise that feed is almost always the primary factor that determines profitability in beef operations. As such, it is important to minimize feed costs, but only when it can be accomplished without hindering production. Keeping this in mind, these 10 best management practices will help cow-calf producers optimize production through feeding program management.

Cattle

Ten Ways to Reduce Feed Costs in Cow-calf Operations

1. Extend the grazing season

Beef cow business records consistently demonstrate that the most profitable operations observe an extended grazing season. In the Midwest, extended grazing often incorporates some combination of stockpiled grazing (predominantly tall fescue) and/or grazing corn residue. Days available for extended grazing are dramatically impacted by acres available and weather, but in many instances corn residue can provide around 60 days of grazing prior to use of stockpiled pasture. Operations that use both corn residue and stockpiled grazing practices often can delay delivery of harvested forages until after the first of the year. Remember that every day spent grazing is one less day cows need to consume stored feed.

2. Incorporate alternative feeds

Coproducts of the ethanol industry and by- product feeds such as soybean hulls traditionally have been labeled “alternative feeds.” Given the prevalence of use in many Midwestern operations, these feeds are far from alternatives. They are almost always a cheaper energy and/or protein source when compared with other commercially available supplements. These feedstuffs also are low in starch and high in digestible fiber which complement a forage-based diet extremely well.

Local opportunities may be available to acquire unique feedstuffs that meet supplementation needs at a lower cost per unit of needed nutrient.

Ruminants can make nutritional use of a wide array of products, see local extension professionals and nutritionists to evaluate how novel feeds can be worked into feeding systems.

3. Utilize a ration balancing program

Ration balancing programs such as Iowa State University’s BRaNDS are a tremendous resource. These programs allow producers to quickly adapt to changes in forage quality, supplement resources, weather, and stages of production to ensure least-cost feeding strategies. The initial cost of software typically is offset in feed savings within the first handful of rations that are balanced.

4. Minimize waste

Harvested forages represent the largest single feed cost in most Midwestern operations. Storage and feeding methods dramatically impact the amount of storage loss and waste at the feeder, and together storage and feeding losses often exceed 30 percent in many herds.

Consider adding a hay shed for reduced waste and potential to store hay for several years. Even at a significant initial cost, a shed typically will pay for itself long before it is fully depreciated and lower expenses will help buffer high priced forages in a drought situation. Storage waste also can be reduced by storing hay under cover and off the ground.

Another option is to grind forages and incorporate them into a total mixed ration (TMR) to reduce sorting and waste at the feeder. However, the initial cost of equipment and infrastructure for TMR delivery may be prohibitive in small- to medium-sized operations. Research has shown that cows can consume their dry matter requirements in as little as 6 hours per day depending on forage quality, reducing the amount of sorting and waste at the feeder. Smaller operations could reduce bale feeder access through the use of electric fence or installation of a low-cost feeding pad that can be gated off.

5. Improve record keeping to reduce inputs

Producers cannot improve what they do not measure. Without extensive feed and production records it is nearly impossible to determine whether an operation is reducing feed waste, improving pasture productivity, or reducing feed cost, and how such changes are affecting performance. Purchased feed costs are well tracked in most operations. However, farm-raised feeds, as well as feed-related fixed and operating costs, both of which dramatically impact feed costs are typically not well defined, giving many producers a false sense of feed costs for the herd. In many small- to medium-sized operations, purchasing forages may be a more economically sensible option as forage related fixed and operating costs are not spread over enough production units to merit ownership of equipment.

6. Enhance pasture productivity

Test soils and fertilize pastures accordingly. Split application often maximizes the investment in nitrogen. Control weeds which reduce forage productivity. Add a forage species such as a legume or warm season grass to your grazing plans to increase tonnage and ensure a constant supply of forage during the summer months.

Incorporate rotational grazing or management intensive grazing to allow greater pasture resting periods and help suppress invasive weed species from asserting themselves into the stand. While all of these practices require labor and monetary investment, the return in carrying capacity and/or grazing days will far exceed the cost.

7. Analyze forages

Forage sampling and nutrient analysis is easily one of the best returns on investment in any operation. It probably goes without stating that weather, maturity, harvest, and storage methods all have a dramatic impact on forage quality. However, without a forage analysis, any supplementation strategy that is implemented is purely a guess and rarely mimics the true needs of the herd. Overfeeding is an obvious waste of money, while underfeeding is a waste of production and genetic potential.

8. Critically evaluate “cure-alls”

There is no shortage of convenient, commercially available energy and protein supplements, minerals, and nutraceuticals aimed at meeting the nutritional need of the cow herd. All of these products have their place, but be sure the supplement meets a true deficiency in the current diet before adding it. These products should not be viewed as management replacers, rather they are management enhancers for which you are paying a premium for the added convenience. Critically analyze all aspects of the nutrition program to ensure sound management practices before utilizing these products to enhance the operation’s outcomes.

9. Split cattle into age/size appropriate groups

Separating cows based on their nutrient needs provides for targeted feeding strategies, minimizes dominant/subordinate relationships at the bunk, and reduces overall feed costs of the herd. Young, growing females need more total dietary energy and protein, but cannot ingest as much dry matter as mature cows. When multiple age groups are commingled, young cows do not consume enough to meet their needs while older cows often overeat. This either drives up the cost of feed for the entire herd in an attempt to meet requirements of young cattle, or results in thin young cows and overweight older cows. Thus, managing them as separate groups will optimize performance of yearling and first-calf females. In larger herds, there also is value in splitting mature cows into two or more groups to better meet the nutrient demands of aging cows that may not be as thrifty as those in their prime.

10. Identify efficient cattle through genetics

Increased feed efficiency will always be a major point of emphasis for cattle operations. In recent years, development of individual feeding system technology has allowed some producers and many breed associations to collect intake data and identify more efficient cattle. Current research is directed at identification of genes that control intake and efficiency. This information could be used to incorporate more efficient genetics into a herd to reduce intake and feed costs without sacrificing production and marketing goals.

Related Case

3-4T/H Ruminant Animal Feed Pellet Line Export To Hong Kong,China

3-5T/H Ruminant Animal Feed Pellet Line Export To Indonesia

5-6T/H Cattle Feed+10T/H Chicken Feed Pellet Production Line Export To Saudi Arabia

10T/H Ruminant Feed Pellet Line Export To South Africa

The above is the article for you: What Are The Ways For Cattle Farms To Reduce The Cost Of Calf Production?. If you are interested in our products or project solutions, please contact us. We will give you the best product quality and the best price. Email: enquiry@pellet-richi.com